15 April 2014

One Room Challenge - Week Two

This week I prepped for vanity installation - installed shutoff valves, cut out plumbing access in the back of the dresser, and cut a hole in the top for the sink. Before I could screw the vanity into place, I needed to install the baseboard. I used the baseboard we salvaged from the classroom near Cincinnati, but I had to strip it of several layers of paint first. The wood was pretty but not so pretty that I felt guilty for painting it. I made and installed the plinth blocks for the doors. I wanted to get to the door trim, but making plinth blocks and stripping paint ate up a lot of work time this week (plus we were out of town over the weekend). Installing the plinths had to come before the baseboard, but the rest of the door trim can wait a bit longer.

That's it for week 2! 

06 April 2014

One Room Challenge - Week One

White hex tile floor with silver grout
The bathroom floor is done! And it didn't take 2 years to get it grouted! I used Mapei's Silver grout with the hex tiles. I would have been happy to go a tad darker, but a darker color would have drawn too much attention to my less-than-perfect tile installation. 

Grouting the floor was holding up the rest of the bathroom; the toilet, vanity/sink, and door trim all depended on its completion. I also grouted the walls adjacent to the (eventual) toilet, since that will be difficult to reach once the commode is installed. Grouting is a long - though not difficult - process, so that's it for week one!

03 April 2014

One Room Challenge

One of the blogs I follow, My Notting Hill, is participating in a One Room Challenge. Twenty bloggers each pick one room in their homes to transform over the course of six weeks. I thought I'd play along to give myself some motivation to push through the bathroom renovation and finally get something done. So here's what I'm starting with:

This is currently what you see from the hallway. It's where the vanity will go. 

 This is opposite the vanity. I think I will be installing Ikea cabinets here, or perhaps a piece of furniture like a buffet or console.

This is the shower side.

This is the toilet side, though clearly lacking a toilet.

I'll try and update every Sunday on the progress I made the previous week. A lot of the work that needs to be done is obvious, like finishing the tile and installing a toilet and sink. But there is a bit of decorator-y kind of stuff I want to get done, too. We'll see how far I get in 6 weeks!

02 April 2014

Once upon a(n embarrassingly long) time ago, I started tiling the floor of our hall bathroom. Two years later, it still sat undone, yet ridiculously close to completion. I only had a small area just inside the doorway left to do, which required a few cuts.














I don't know why I found cutting the mosaics so intimidating, but it was enough of a problem for me to stall out on this project for two years. I ended up just popping the tiles off the sheets and holding each individual tile in my hand (you could use pliers if you're into "safety" or whatever) and grinding it against the side of the spinning saw blade. The cuts aren't perfect, but they'll do. I only had about 20 tiles that needed to be cut, so it didn't take too long. 












Now that the floor is laid and cleaned up, I can grout! Hopefully it'll get done faster than the tiling did.

*As a small defense, tiling is not something you can do for 5 minutes here or there when you've got a small break. With mortar, you've got to have a block of time to devote to tiling, and that just doesn't happen. Ever.

26 November 2013

Kitchen planning: Inspiration

I'm pretty obsessive thorough with my research, and as a result, I think I've seen just about every kitchen picture ever published on the internet. Here are some that I really love. 





















I guess my tastes run pretty traditional but not overly fussy. Homey and comfortable. Grandma's kitchen without the red gingham. Streamlined farmhouse? Updated shaker? Country without the kitsch? I think I have a clear idea of the direction I'm heading with it, I just don't have the right descriptive words for it.

20 November 2013

More junk for the house

I am so glad I took a risk and bid, sight unseen, on a classroom full of chalkboards. They're 3/8" thick, silky smooth, heavy as hell, and positively gorgeous. We had one casualty when removing them from the walls, but we still have plenty for our project (and we took the larger broken chunks for practice runs, so it's not all lost). 

Removal was a lot easier than I expected. Some of the boards had been adhered with mastic and some with plaster. After we removed the quarter-round molding, the slates with mastic just leaned out - the mastic had long since deteriorated beyond usefulness. The ones with plaster required a tiny bit of prying around the edges. We got all 12 panels down in about an hour and a half. I spent the rest of the afternoon removing wood trim while Tom enlisted some help carrying the slate down to the vehicle. We were unfortunately not able to bring all the trim with us, but I think we'll be able to use what we brought home. 

One of the chalkboards held a sweet message from a former graduate:


Behind the trim I found the signature of a construction worker, along with the place and date:
Clyde Wamsley 

Cleves (OH) Dec 30, 1941 

The drive home was stressful, but we made it with everything intact. So now we've got about 1,000 pounds of slate sitting outside in a borrowed trailer. Tom is supposed to be getting some help bringing it inside this afternoon. Now I just need to get my rear in gear and get some stuff done downstairs so I can actually use some of the crap treasures I've accumulated!

18 November 2013

Kitchen planning: The window seat

Like a lot of old houses, our windows are very low, which makes kitchen planning difficult. In the area that was originally the kitchen (the in-law suite in our current plan), there are 3 windows and 4 doors, making an efficient modern kitchen layout all but impossible. I might want my kitchen to look old, but it's got to work

Moving the kitchen to what was originally the dining room helped alleviate some of this problem - the dining room has a bank of three windows that is high enough to accommodate modern cabinets. That's where we've placed the sink in our plan. But there is another window near the corner that drops to about 18" from the floor like the rest of the windows in the house. I decided to place an L-shaped window seat there instead of standard cabinets. I hate corner cabinets, so I'm actually thankful for the low window height. Like the rest of my ideas, I always think it's a little unorthodox until I start doing research and find out it's not an original idea after all. 



Our window seat is between the sink and range in prime prep location, but I'm imagining a few little helpers standing on the window seat to help with cleaning extra cake batter off the mixing bowls and spoons (don't worry - there will be a 30" cabinet between the seat and the stovetop, safely out of reach of little hands). Construction will be similar to the built-ins in the girls' bedroom - over-the-fridge cabinets outfitted with ikea drawers to maximize storage potential. 

If I discover that I really need more counter space in that area, I've toyed with the idea of adding drop-leaf countertops on the ends of the cabinets. When not in use, they'd lay against the cabinet side neatly out of the way. Again, apparently there's nothing new under the sun. My novel idea has been done!



Fortunately, that's an easy thing to retrofit, so I'm going to wait to find out if it's necessary. I've already made this into a 10-year project, so what's a little more time?