One Room Challenge - Week One

The bathroom floor is done! And it didn't take 2 years to get it grouted! I used Mapei's Silver grout with the hex tiles. I would have been happy to go a tad darker, but a darker color would have drawn too much attention to my less-than-perfect tile installation. 

Grouting the floor was holding up the rest of the bathroom; the toilet, vanity/sink, and door trim all depended on its completion. I also grouted the walls adjacent to the (eventual) toilet, since that will be difficult to reach once the commode is installed. Grouting is a long - though not difficult - process, so that's it for week one!

One Room Challenge

One of the blogs I follow, My Notting Hill, is participating in a One Room Challenge. Twenty bloggers each pick one room in their homes to transform over the course of six weeks. I thought I'd play along to give myself some motivation to push through the bathroom renovation and finally get something done. So here's what I'm starting with:

This is currently what you see from the hallway. It's where the vanity will go. 

 This is opposite the vanity. I think I will be installing Ikea cabinets here, or perhaps a piece of furniture like a buffet or console.

This is the shower side.

This is the toilet side, though clearly lacking a toilet.

I'll try and update every Sunday on the progress I made the previous week. A lot of the work that needs to be done is obvious, like finishing the tile and installing a toilet and sink. But there is a bit of decorator-y kind of stuff I want to get done, too. We'll see how far I get in 6 weeks!

Once upon a(n embarrassingly long) time ago, I started tiling the floor of our hall bathroom. Two years later, it still sat undone, yet ridiculously close to completion. I only had a small area just inside the doorway left to do, which required a few cuts.

I don't know why I found cutting the mosaics so intimidating, but it was enough of a problem for me to stall out on this project for two years. I ended up just popping the tiles off the sheets and holding each individual tile in my hand (you could use pliers if you're into "safety" or whatever) and grinding it against the side of the spinning saw blade. The cuts aren't perfect, but they'll do. I only had about 20 tiles that needed to be cut, so it didn't take too long. 

Now that the floor is laid and cleaned up, I can grout! Hopefully it'll get done faster than the tiling did.

*As a small defense, tiling is not something you can do for 5 minutes here or there when you've got a small break. With mortar, you've got to have a block of time to devote to tiling, and that just doesn't happen. Ever.

Kitchen planning: Inspiration

I'm pretty obsessive thorough with my research, and as a result, I think I've seen just about every kitchen picture ever published on the internet. Here are some that I really love. 

Source

Source

Source

Source

Source

Source

Source

Source

Source

Source

I guess my tastes run pretty traditional but not overly fussy. Homey and comfortable. Grandma's kitchen without the red gingham. Streamlined farmhouse? Updated shaker? Country without the kitsch? I think I have a clear idea of the direction I'm heading with it, I just don't have the right descriptive words for it.

More junk for the house

I am so glad I took a risk and bid, sight unseen, on a classroom full of chalkboards. They're 3/8" thick, silky smooth, heavy as hell, and positively gorgeous. We had one casualty when removing them from the walls, but we still have plenty for our project (and we took the larger broken chunks for practice runs, so it's not all lost). 

Removal was a lot easier than I expected. Some of the boards had been adhered with mastic and some with plaster. After we removed the quarter-round molding, the slates with mastic just leaned out - the mastic had long since deteriorated beyond usefulness. The ones with plaster required a tiny bit of prying around the edges. We got all 12 panels down in about an hour and a half. I spent the rest of the afternoon removing wood trim while Tom enlisted some help carrying the slate down to the vehicle. We were unfortunately not able to bring all the trim with us, but I think we'll be able to use what we brought home. 

One of the chalkboards held a sweet message from a former graduate:

Behind the trim I found the signature of a construction worker, along with the place and date:

Clyde Wamsley 

Cleves (OH) Dec 30, 1941 

The drive home was stressful, but we made it with everything intact. So now we've got about 1,000 pounds of slate sitting outside in a borrowed trailer. Tom is supposed to be getting some help bringing it inside this afternoon. Now I just need to get my rear in gear and get some stuff done downstairs so I can actually use some of the crap treasures I've accumulated!

Kitchen planning: The window seat

Like a lot of old houses, our windows are very low, which makes kitchen planning difficult. In the area that was originally the kitchen (the in-law suite in our current plan), there are 3 windows and 4 doors, making an efficient modern kitchen layout all but impossible. I might want my kitchen to look old, but it's got to work! 

Moving the kitchen to what was originally the dining room helped alleviate some of this problem - the dining room has a bank of three windows that is high enough to accommodate modern cabinets. That's where we've placed the sink in our plan. But there is another window near the corner that drops to about 18" from the floor like the rest of the windows in the house. I decided to place an L-shaped window seat there instead of standard cabinets. I hate corner cabinets, so I'm actually thankful for the low window height. Like the rest of my ideas, I always think it's a little unorthodox until I start doing research and find out it's not an original idea after all. 

Source

Source

Our window seat is between the sink and range in prime prep location, but I'm imagining a few little helpers standing on the window seat to help with cleaning extra cake batter off the mixing bowls and spoons (don't worry - there will be a 30" cabinet between the seat and the stovetop, safely out of reach of little hands). Construction will be similar to the built-ins in the girls' bedroom - over-the-fridge cabinets outfitted with ikea drawers to maximize storage potential. 

If I discover that I really need more counter space in that area, I've toyed with the idea of adding drop-leaf countertops on the ends of the cabinets. When not in use, they'd lay against the cabinet side neatly out of the way. Again, apparently there's nothing new under the sun. My novel idea has been done!

Source

Source

Fortunately, that's an easy thing to retrofit, so I'm going to wait to find out if it's necessary. I've already made this into a 10-year project, so what's a little more time?

Kitchen planning: Lighting

The plan for the kitchen lighting has admittedly been a difficult one. I started with one basic premise: no recessed lights. You wouldn't believe the amount of pushback those three words can cause. Apparently not many people go this route for their kitchen renovations and information on lighting a kitchen without recessed cans was hard to come by. I finally found some general lighting guidelines that might help:

30 lumens per square foot for ambient lighting

75 lumens per square foot for task lighting

50 lumens per square foot for lighting at table

So for my kitchen, which is roughly 230 square feet, I figured on 4 general lighting fixtures (100 watts each), one central light over the table/island, and wall sconces by the windows, along with under-cabinet lights wherever possible (plus the vent hood will have its own lights). This will provide plenty of light from different directions, minimizing problematic shadows and providing flexibility for different situations. Having survived just fine for several years with nothing but a desk lamp for lighting in my kitchen, I am of the mind that this is probably way overkill, but I'd rather have the ability to turn on fewer lights than to need more. Once I had the quantity sorted, I spent some time with the floor plan to locate just where they'd go. 

Now that I had the quantity and location nailed down, I could do the sourcing. To Craigslist!

I found a matching pair of Art Deco skyscraper shades for $60. 

They coordinated well with another group of lights I bought previously (also off Craigslist - are you sensing a theme?) for the living room, these Rejuvenation fixtures:

Retail price: $445(!) I paid $200 for 4 Art Deco fixtures with shades, one spare shade, plus one schoolhouse light with its fixture!

A little bit of research showed that the smaller shades are fairly easy to find, so I was ok with trying to source 2 more later. Unfortunately, one of them broke on its way into the house, so I have to find 3 more. 

I am still not sure what specific chandelier or sconces or undercabinet lighting I will use. What I do know is that the sconces will be mounted on the window trim between windows. There's about 7" of space between each window, the perfect amount of room for a light. Can't picture a sconce on the window trim? Here's an example:

Gardenweb user aokat15

Since they are supposed to serve as task lighting for the sink and countertop, mine will probably be something with a metal shade to direct light downward rather than out. But at least the locations are set, so I can wire up the boxes and wait for the Craigslist gods to send me a sign.